Effect of Chlorine Released during Hydrodechlorination of Chlorobenzene over Pd, Pt and Rh Supported Catalysts

Chlorobenzene hydrodechlorination in liquid phase has been studied. Chlorine released during the reaction inhibits conversion in large metallic particles. It was found comparing the behavior of Pd/SiO₂, Pd/Al₂O₃ and Pd/C catalysts that the support plays the role of a chlorine trap. The activity for Pt, Rh and Pd at similar dispersions corresponds to the chlorine adsorption affinity of the metals.     

Search for events with leptonic jets and missing transverse energy in pp collisions at √s=1.96 TeV

We present the first search for pair production of isolated jets of charged leptons in association with a large imbalance in transverse energy in pp collisions using 5.8 fb?1 of integrated luminosity collected by the D0 detector at the Fermilab Tevatron Collider. No excess is observed above the standard model background, and the result is used to set upper limits on the production cross section of pairs of supersymmetric chargino and neutralino particles as a function of "dark-photon" mass, where the dark photon is produced in the decay of the lightest supersymmetric particle.     

The Effect of Grain Size on Deformation and Failure of Ti<Subscript>2</Subscript>AlC MAX Phase under Thermo-Mechanical Loading

An experimental investigation was performed to analyze the effects of grain size on the quasi-static and dynamic behavior of Ti₂AlC. High-density Ti₂AlC samples of three different grain sizes were densified using Spark Plasma Sintering and Pressureless sintering. A servo-hydraulic testing machine equipped with a vertical split furnace, and SiC pushrods, was used for the quasi-static experiments. Also, a Split Hopkinson Pressure Bar (SHPB) apparatus and an induction coil heating system were used for the dynamic experiments. A series of experiments were conducted at temperatures ranging from 25 °C to 1100 °C for strain rates of 10^?4 s^?1 and 400 s^?1. The results show that under quasi-static loading the specimens experience a brittle failure for temperatures below Brittle to Plastic Transition Temperature (BPTT) of 900–1000 °C and large deformation at temperatures above the BPTT. During dynamic experiments, the specimens exhibited brittle failure, with the failure transitioning from catastrophic failure at lower temperatures to graceful failure (softening while bearing load) at higher temperatures, and with the propensity for graceful failure increasing with increasing grain size. The compressive strengths of different grain sizes at a given temperature can be related to the grain length by a Hall-Petch type relation.     

Search for stopped gluinos from pp collisions at square root s = 1.96 TeV

Long-lived, heavy particles are predicted in a number of models beyond the standard model of particle physics. We present the first direct search for such particles' decays, occurring up to 100 h after their production and not synchronized with an accelerator bunch crossing. We apply the analysis to the gluino (g), predicted in split supersymmetry, which after hadronization can become charged and lose enough momentum through ionization to come to rest in dense particle detectors. Approximately 410 pb(-1) of pp collisions at square root(s) = 1.96 TeV collected with the D0 detector during Run II of the Fermilab Tevatron collider are analyzed in search of such "stopped gluinos" decaying into a gluon and a neutralino (chi(1)(0)). Limits are placed on the (gluino cross section) x (probability to stop) x [BR(g --> g chi(1)(0))] as a function of the gluino and chi(1)(0) masses, for gluino lifetimes from 30 micros-100 h.     

Direct observation of the strange b baryon Xib-

We report the first direct observation of the strange b baryon Xi(b)- (Xi(b)+). We reconstruct the decay Xi(b)- -->J/psiXi-, with J/psi-->mu+mu-, and Xi--->Lambdapi--->ppi-pi- in pp collisions at square root of s =1.96 TeV. Using 1.3 fb(-1) of data collected by the D0 detector, we observe 15.2 +/- 4.4(stat)(-0.4)(+1.9)(syst) Xi(b)- candidates at a mass of 5.774 +/- 0.011(stat) +/- 0.015(syst) GeV. The significance of the observed signal is 5.5 sigma, equivalent to a probability of 3.3 x 10(-8) of it arising from a background fluctuation. Normalizing to the decay Lambda(b)-->J/psiLambda, we measure the relative rate sigma(Xi(b-) x B(Xi)b})- -->J/psiXi-)/sigma(Lambda(b)) x B(Lambda(b)-->J/psiLambda) = 0.28+/-0.09(stat)(-0.08)(+0.09)(syst).     

Experimental discrimination between charge 2e/3 top quark and charge 4e/3 exotic quark production scenarios

We present the first experimental discrimination between the 2e/3 and 4e/3 top quark electric charge scenarios, using top quark pairs (tt) produced in pp collisions at (square root) s = 1.96 TeV by the Fermilab Tevatron Collider. We use 370 pb;{-1} of data collected by the D0 experiment and select events with at least one high transverse momentum electron or muon, high transverse energy imbalance, and four or more jets. We discriminate between b- and b-quark jets by using the charge and momenta of tracks within the jet cones. The data are consistent with the expected electric charge, |q|=2e/3. We exclude, at the 92% C.L., that the sample is solely due to the production of exotic quark pairs QQ with |q|=4e/3. We place an upper limit on the fraction of QQ pairs rho<0.80 at the 90% C.L.     

Evaluation of Ammonium Oxalate for Fractionating Metallic Trace Elements in Soils by Sequential Extraction

Abstract

Ammonium oxalate is largely used to extract the trace elements bound to Mn-oxides, amorphous compounds and crystalline Fe-oxides. The objective of this work was to evaluate the selectivity and the efficiency of ammonium oxalate for extracting Cd, Cu, Ni, Pb and Zn by sequential extraction of soils. For this purpose, three schemes were selected and applied to three different soil samples of the Swiss Jura. Each extraction scheme consisted of six steps, where different reagents were used to extract Cd, Cu, Ni, Pb and Zn bound to the Mn and Fe compounds. The results showed that metallic trace elements extraction with ammonium oxalate are very dependant on the metal studied. The reason could be the capability of oxalate to form stable complexes with the metals considered which sometimes are only slightly soluble.     

Modeling Type Ia supernova explosions

Despite their astrophysical significance-as a major contributor to cosmic nucleosynthesis and as distance indicators in observational cosmology-Type Ia supernovae lack theoretical explanation. Not only is the explosion mechanism complex due to the interaction of (potentially turbulent) hydrodynamics and nuclear reactions, but even the initial conditions for the explosion are unknown. Various progenitor scenarios have been proposed. After summarizing some general aspects of Type Ia supernova modeling, recent simulations of our group are discussed. With a sequence of modeling starting (in some cases) from the progenitor evolution and following the explosion hydrodynamics and nucleosynthesis we connect to the formation of the observables through radiation transport in the ejecta cloud. This allows us to analyze several models and to compare their outcomes with observations. While pure deflagrations of Chandrasekhar-mass white dwarfs and violent mergers of two white dwarfs lead to peculiar events (that may, however, find their correspondence in the observed sample of SNe Ia), only delayed detonations in Chandrasekhar-mass white dwarfs or sub-Chandrasekhar-mass explosions remain promising candidates for explaining normal Type Ia supernovae.     

Dielectric properties of self-assembled layers of octadecylamine on mica in dry and humid environments

Atomic force microscopy operating in noncontact electrostatic force mode was used to study the interaction of water with films of alkylamines and alkylsilanes on mica. The films efficiently block water adsorption except in exposed mica areas, where it strongly modifies the mobility of surface ions. We also studied the molecular orientation of octadecylamine molecules forming monolayers and multilayer islands. In monolayer films the molecules bind to mica through the amino group, producing a positive contact potential relative to mica (dipole pointing up). In multilayer films the methyl and amino group terminations are exposed in alternating layers that give rise to alternating values of the contact potential. These findings correlate with low and high friction forces measured in the methyl termination and amino terminations.     

Biomimetics with a self-assembled monolayer of catalytically active tethered isoalloxazine on Au

A new biomimetic nanostructured electrocatalyst comprised of a self-assembled monolayer (SAM) of flavin covalently attached to Au by reaction of methylformylisoalloxazine with chemisorbed cysteamine is introduced. Examinations by Fourier transform infrared spectroscopy and scanning tunneling microscopy (STM) show that the flavin molecules are oriented perpendicular to the surface with a 2 nm separation between flavin molecules. As a result of the contrast observed in the STM profiles between areas only covered by unreacted cysteamine and those covered by flavin-cysteamine moieties, it can be seen that the flavin molecules rise 0.7 nm above the chemisorbed cysteamines. The SAM flavin electrocatalyst undergoes fast electron transfer with the underlying Au and shows activity toward the oxidation of enzymatically active beta-NADH at pH 7 and very low potential (-0.2 V vs Ag/AgCl), a requirement for use in an enzymatic biofuel cell, and a 100-fold increase in activity with respect to the collisional reaction in solution.